Open Thermal AI
Static Report Layout Sample — Food Plant Ammonia Exhaust Heat Recovery 静态报告版式样例 — 食品厂氨制冷机排气热回收
Executive summary (fictional placeholders)执行摘要（虚构占位）
- Feasibility (illustrative): Conditional — ammonia refrigeration discharge ~30 °C with 80 °C wash/sanitation hot water.可行性（示意）：有条件可行 — 氨制冷排气约 30 °C，清洗/消杀热水 80 °C。
- Recommended architecture (illustrative): mid-temp R717 heat pump coupled via evaporative-condenser interface.推荐架构（示意）：氨中温热泵，经蒸发冷凝器接口与制冷系统耦合。
- Indicative COP band (placeholder): 3.5–4.0 at stated boundaries.示意 COP 区间（占位）：在所述边界下 3.5–4.0。
- Annual energy-cost delta (placeholder): ~CNY 450,000 class vs natural-gas boiler assumptions.年能源费用差额（占位）：相对燃气锅炉约 45 万元量级。
- Illustrative payback: ~2–3 y with ±15 % tariff sensitivity.示意回收期：约 2–3 年（电价敏感性 ±15%）。
- Missing for bankable design: seasonal refrigeration vs heat mismatch, ammonia safety envelope, backup boiler policy.可融资设计仍缺：制冷与热需求季节错配、氨安全包络、备用锅炉策略。
User inputs (demonstration placeholders)用户输入（演示占位）
| Parameter参数 | Value数值 |
|---|---|
| Source temperature热源温度 | 30 °C |
| Target temperature目标温度 | 80 °C |
| Heat load热负荷 | 380 kW |
| Annual operating hours年运行小时 | 5,400 h |
| Comparison heat source对比供热方式 | Natural gas boiler天然气锅炉 |
| Electricity price电价 | 0.70 CNY/kWh |
Technical feasibility (illustrative)技术可行性（示意）
- Feasibility可行性
- Conditional有条件可行
- Architecture架构
- Mid-temp ammonia HP + evaporative condenser coupling氨中温热泵 + 蒸发冷凝器耦合
- Temperature lift温升
- 50 K
- COP rangeCOP 区间
- 3.5 – 4.0
Economic analysis (illustrative)经济分析（示意）
- Annual saving年节约
- ~CNY 450,000
- Illustrative CAPEX示意 CAPEX
- ~CNY 1,000,000
- Payback回收期
- ~2.3 y
Risks and uncertainties风险与不确定性
- Ammonia safety and plant-room access rules constrain where the HP can sit.氨安全与机房通行规则约束热泵布置位置。
- Seasonal refrigeration load vs wash-heat demand mismatch may force boiler backup hours.制冷负荷与清洗用热的季节错配可能迫使锅炉备用小时。
- Tariff and carbon policy changes dominate payback sensitivity.电价与碳政策变化主导回收期敏感性。
Engineering disclaimer工程免责声明
This HTML file is a Static Report Layout Sample. Numbers are fictional placeholders for product education and print/layout review only. They are not Tool Version / Analysis Version outputs. Open Thermal AI screening outputs must be reviewed by qualified engineers before design, procurement, construction, or operation. 本 HTML 为静态报告版式样例。数值仅为产品教育与打印/版式审阅用的虚构占位，不是工具版本 / 分析版本产出。Open Thermal AI 初筛结果须经具备资质的工程师复核后，方可用于设计、采购、施工或运行。